You are here: Home > Integrative Training > RSB2 > Gear_53T

Manufacturing Procedures - Gear_53T

 

Total five 53 teeth gears (Gear_a_53T X 2 and Gear_b_53T X 2) are manufactured in the MMU workshop.

Students are required to cut the outside diameter of the gear, drill the centre hole, the pilot hole, bore the hole to the accurately diameter by using a Centre Lathe. Teeth of the Gear is cut by using the Gear Hobbing Machine in Metal Cutting Workshop. Keyway of the component is produced by using the Wire-Cut Machine in the NCM workshop.