You are here: Home > Integrated Training > MDS > Gears

Manufacturing Procedures - Gear43 (Gear37)

 

Two gears, the 43T and 37T gears are manufactured by using the Centre Lathe, Gear Hobbing Machine, and Wide-cut Machine together. Students are required to drill centre hole, pilot hole, large hole by using the Tailstock of the Centre Lathe and to bore the hole to the accurately diameter by using a boring tool.

Teeth of the Gear is cut by using the Gear Hobbing Machine in Metal Cutting Workshop. Keyway of the component is produced by using the Wide Cutting Machine equipped in the NCM workshop.

Open CAD Drawing of Gear 43
Open CAD Drawing of Gear 43